J&L Yuma Concrete and MasonryJ&L Yuma Concrete and Masonry

Walkway construction in Yuma AZ - a solid, even path from the driveway to your door

Cracked slab or dirt track to your door? We build concrete and paver walkways in Yuma that sit flat and feel solid underfoot.

Curved gray paver walkway with pale stone edging winds through landscaped lawns beside a house.
  • Fully licensed and insured.
  • Free estimates at your property.
  • Replies within 1 business day.

What does it take to build a walkway in Yuma?

Walkway construction in Yuma, AZ means building a new paved path from your driveway, gate or street to your door, in poured concrete or pavers, set on a packed base so it stays flat, drains and is safe to walk on every day.

Most people who call me about a walkway are stepping around a cracked slab, a path that's sunk and holds water, or a dirt track the family has worn across the yard. The price mostly comes down to how long and wide the walk is, whether you pick concrete or pavers, how much old concrete or soil we have to haul out and whether the walk ties into the public sidewalk. The schedule turns on the same things, plus the weather on pour day and any city paperwork at the street, and your own figure comes in the written estimate I put together after I've walked the path with you. If the driveway needs work too, we can plan the walk alongside new driveway pavers so the two match.

How do you know your walkway needs replacing?

  • Cracked or lifted slabs

    When a section cracks through or one edge rises above the next, you get a lip that catches toes and a gap that lets water and dirt get under the slab. It usually means the base underneath has moved, and the longer you wait, the more the cracks spread to the pieces next to them.

  • Water standing on the path

    Puddles that sit on the walk after rain or a sprinkler run mean it has settled or was never sloped to drain. Standing water leaves stains and slick spots, and it keeps soaking the base that's supposed to hold the walk up.

  • Pavers rocking underfoot

    A paver that tips when you step on it usually has a soft or washed-out base below it, or the edging along the side has let go. Caught early, we can lift and relay that section, but left alone the loose pieces spread and the whole run starts to wander.

How we handle walkway construction

The first thing I settle with you is the surface, and I start by asking whether you'd like rain to run off the walk or soak into the ground, because that sorts concrete from pavers better than looks do. If the walk will meet the public sidewalk, I bring that up right away too, since that piece has its own rules and it's easier to plan for than to discover late. Then we mark the line, dig down to firm ground, haul off the old slab or soil and pack a gravel base in layers, because a walk only stays as flat as what's under it. For concrete we set forms, pour, slope and finish the surface and add the joints that control cracking. For pavers we screed a sand bed, which means leveling it with a straight board, then lay the pattern, set edging so the sides hold and sweep sand into the joints. We haul off the mess and clean up before we call it done.

A walk usually ends at something, a step, a gate or a planter, so we build the masonry around it too. Our brick wall installation work covers low garden walls and planter edges along a path, and our stone masonry covers stone steps, borders and landings where the walk meets the house.

  • Poured concrete walk

    This suits you if you want one smooth, continuous surface that's easy to sweep and easy to roll a cart or wheelchair over. Rain runs off concrete, so we slope it toward the yard or a spot where the water can go.

  • Paver walk

    This suits you if you'd like rain to soak in between the pieces, or you want a pattern or color that goes with the house. If a section settles or a line has to go under it later, pavers can be lifted and relaid instead of broken out.

Get a free estimate for your new walkway

Send the form and we'll get back to you within one business day to set a time. I'll come out, walk the path with you and write up a free estimate, with no pressure to book.

(928) 271-5129
Based in
Yuma, AZ 85364
Hours
Mon–Sun: 7 AM–10 PM

What happens when you call about a walkway in Yuma?

Here's how a walkway job runs with us, from your first call to the day you walk on the finished path.

  1. Call or send the form

    Call (928) 271-5129 or send the form, and we'll get back to you to pick a day for me to come out. Mornings, evenings and weekends all work for a visit.

  2. Walk the path with me

    I come out myself, walk the route with you and explain what I see, from the ground under it to where the water will go and whether the walk reaches the sidewalk. Then I write up an estimate that spells out the surface, the work and the price, so you know what you're paying for before you decide.

  3. We build and hand it over

    Once any city paperwork is squared away, my crew and I do the work, and I'm on site with them. As each stage wraps up, from dig-out to base to pour or pavers, I tell you what comes next and when the walk is ready to use.

Why Yuma homeowners call J&L Yuma Concrete and Masonry for walkways

  • I walk every job myself

    The person who looks at your walk in Yuma and writes the estimate is me, and I work alongside my crew when we build it. Nothing gets lost between what we talked about in your yard and what goes into the ground.

  • In business since 2013

    We've been at this for 13 years, and before that I laid block and brick on new homes going up. That time taught me what keeps a path flat and what makes one sink, crack or hold water.

  • Fully licensed and insured

    Our license and insurance cover the work at your house from the first shovel to cleanup. That protects you if something goes wrong while the job is open, and it means you aren't left carrying the risk of hiring us.

What matters most on a walkway is the base under it and where the water goes, and I'd rather explain both standing in your yard than over the phone. Set up a time for me to come out.

Walkways, steps and street connections in Yuma

Permits in Yuma go through the city's Building Safety Division, which generally requires them for new construction and remodels. Its list of work that doesn't need one names fencing, painting and minor repairs, not walkways, so the division is the place to ask about your walk, and when a job does need a permit we handle the application and set up the inspections. Things change when the walk meets the public sidewalk. Opening, cutting or digging in a city street, sidewalk, easement or right-of-way takes a written permit application to the city with plans showing where the work sits, and either you or your contractor can apply. For work on a city easement or right-of-way, the city also asks for an encroachment permit application, its permit for building on city land, filed with the city's Engineering Department. The city's construction standards, a set of drawings and specifications, apply to private work as well as public, so we build the connection to match them.

Most walks we build here run from the driveway to the front door or out to a back patio, and a lot of them replace an older slab that's cracked or settled, or a gravel path the family is tired of raking. We're based in Yuma and work across the cities around it, and we see the same kinds of walks on jobs in Fortuna Foothills and Somerton.

Questions about walkway construction in Yuma

How much does a concrete walkway cost in Arizona?

A standard concrete pour in Arizona usually costs about $5 to $11 per square foot installed. That's the going rate across the state, not a quote from us, and choosing pavers, breaking out an old walk or tying into the public sidewalk all move your number. I give you your own figure in writing after I've seen the job.

What is the best way to let rain soak in along a walkway?

Build it in pavers or porous concrete, because extension guidance from Illinois notes that interlocking or open pavers and porous concrete let rain soak into the soil or gravel below, while traditional concrete sheds all of it. If keeping water on your own ground matters to you, those are the surfaces to weigh. A poured concrete walk works fine too, as long as it's sloped so the runoff has somewhere to go.

Is hot weather a problem when pouring a concrete walkway?

Yes, it can be, because national concrete guidance says hot weather makes concrete set faster and lose moisture faster, which causes trouble in delivering, placing and curing it. Those problems can hurt how the walk performs and holds up, and the same guidance says high wind and low humidity affect fresh concrete too. That's why we check the forecast before we set a pour day.

Who can do the work where my walkway meets the city sidewalk in Yuma?

The city's code lets only Arizona-licensed contractors for that type of work, utilities or government agencies work in a public street, sidewalk, easement or right-of-way. So even if you build the rest of the walk yourself, the tie-in at the city sidewalk isn't a homeowner job. The permit side of it is covered in the Yuma section above.

Can I build my own walkway in Arizona without a contractor's license?

Yes, if it's for your own use, because Arizona's contractor license law exempts owners who improve their own property themselves, with their own employees or with licensed contractors. That exemption doesn't cover a property you're building to sell or rent. The piece that meets a public sidewalk still falls under the city's rule in the answer above.

What causes a new concrete walkway to crack?

Concrete shrinks as it dries, so a walk cracks somewhere unless control joints, lines tooled or saw-cut partway into the slab, give it a planned place to do it. A soft or poorly packed base is the other usual cause, because the slab settles wherever the ground gives. Concrete guidance lists hot, sunny weather and high wind with low humidity as conditions that shorten the window for sawing those joints, so ask any crew how it plans its sawing when the forecast is hot or windy.

  • Brick wall installation

    A low brick wall along your new walk can hold back a planter bed, mark the yard's edge and keep soil and gravel off the path.

  • Stone masonry

    Stone steps, borders or a stone landing where the walk meets your porch give the path a finished edge and stand up to steady foot traffic.

Walkway service areas around Yuma

J&L Yuma Concrete and Masonry is based in Yuma, AZ, and we build walkways across the cities around it. Four cities have their own page on this site, including Somerton and San Luis, and they're not the only places we work.

Yuma, AZ

Start planning your new walkway today

Jot down the walk's rough length and width, the surface you're leaning toward and whether it meets the public sidewalk, and we can get to the real questions on your first call.